PF Bereg Sauna tent 2×2

Description

Bereg PB-1 is a mobile sauna tent designed for organizing bath procedures and maintaining hygiene in the field. The sauna is made in the form of a half-barrel. The streamlined design provides wind-resistance in gusts of wind and the absence of moisture in precipitation conditions.

Complete set of the PB-1 Bath:

The PB-1 sauna tent is equipped with a swing door, a chimney opening for installing the stove, and a window made of frost-resistant PVC that lets in light.

The removable swing door of the sauna tent makes it possible to enter the tent without using zippers, which reduces heat loss. The door consists of a tent fly and a frame, is installed on a Velcro and compactly folds.

The chimney is made of a combination of heat-resistant materials: silicone silica fabric and AISI 430 stainless steel ring. On the outside of the tent fly, the chimney is closed with a special valve on Velcro, which protects the interior of the tent during precipitation and wind. When installing the stove in a sauna tent, the valve is removed and banded together.

PB-1 Sauna application options:

• Mobile sauna tent;
• Heated 4-season tent.

Materials for manufacturing the PB-1 sauna:

• The fly for the sauna tent is made of a dense Oxford 300 fabric with a moisture-repellent PU impregnation index of 4000 mm. Details of tent flys in beige color may vary in shade. This feature does not affect the performance of the product.
• The frame for the sauna tent is made of durable B95T1 duralumin alloy (GOST 21488-97), which gives the user a number of advantages:

– service life up to 10-12 years;

– wind load resistance;

– negative temperatures resistance;

– no deformation.

PB-1 Sauna Tent is equipped with a cover bag made of waterproof PVC fabric with a density of 550 grams per m2.

PB-1 Bath Assembly:

• Remove the tent fly, frame and accessories from the cover bag;
• Install the frame base;
• Insert the folding arcs into the tubes located at the base of the frame. The hinges on the arcs are installed with the open part facing up;
• Secure the longitudinal guide bars with the wing screws;
• Install the outer tent fly on the frame. Secure the tent fly with fasteners;
• Stretch the skirt around the perimeter, install the stakes and draw straps.