PF Bereg Vestibule-connector for UP tents

• Folding frame for stability.
• One-layer fly made of water-resistant fabric.
• Zippered entrance equipped with a mosquito net for ventilation and keeping insects out.
• Two types of tension loops – the first on the flies with reflective elements and the second on the skirt made of thick webbing for secure fastening the vestibule to the ground.
• Small weight and size for storing it in the bag of the UP tent.

The frame of the vestibule connector is made of aluminum alloy B95T1 (in USA AA7075, in EU ENAW 7075). The rod thickness is 8 mm. The material is both lightweight and resistant to corrosion and deformation. The connecting elements of the frame are made of steel.

The fly of the vestibule connector is made of durable Oxford fabric 300 DEN with a water resistance PU rating of 4000 mm. The seams are sealed with special tape for extra protection against water.

The vestibule connector is not intended for separate use and can only be used with UP series tents. It can be ordered for the following tents – UP-2 Mini, UP-2, UP-5, UP-7.

The vestibule connector cannot be used with the PF Bereg Sputnik-3 and Winter-Summer tents due to their lower height.

The PF Bereg UP-2 Deluxe and UP-5 Deluxe tents have a vestibule connector in the basic set.

• Unpack the vestibule: Lay the tent of the vestibule flat with the front side facing up.
• Connect to the tent: Attach the vestibule connector to the UP tent using the zipper.
• Install the frame: Find the detachable zipper and insert the frame arch into it. Begin by inserting the ends of the arch into the pockets. The frame hinges should be facing upwards to allow the arch to take a flexible position. Zip up the zipper with the arch inside while holding the tent.
• Use a strap: There is a strap with an adjuster at the bottom of the vestibule connector. Tighten and fasten the strap to secure the frame.
• Install the placers: Enter the vestibule and place the support spacers into the pockets on the side walls.
• Secure the vestibule: Use ropes and pegs to secure the vestibule connector. Attach the ropes to the guy lines and insert the pegs into the loops on the skirt.